Deep Tissue Metal Detectors – ER3000

Deep Tissue ER3000 Adams hand held metal detectors have been specifically designed for the detection and location of tiny foreign metal objects that have been concealed or ingested deep within the skin tissue or body cavities. This new technology advancement in the Deep Tissue ER3000 Adams hand held metal detectors have established a new level of performance for super high sensitivity metal detection, giving the user the ability to detect objects that were previously impossible to detect with a standard hand held metal detector. Deep Tissue ER3000 has the ability to detect metal fragments that are concealed or buried deep within the skin tissue, making the Deep Tissue ER3000 Adams hand held metal detectors a major step forward in the detection of weapons and contraband concealed within the body cavities.

Operating at a low energy frequency of 20 Khz all Adams hand held metal detectors use Linear Detection Technology (LDT) as the detection system. Developed in the Adams Electronics Incorporated research facility, Linear Detection Technology (LDT) produces a clean signal free from transient noise or unsafe high energy, yet enables a detection sensitivity that can detect even the tiniest fragments of metal – accurately and safely.

Product Description: Wand Style Metal Detector
Dimensions: Length: 360mm; Width: 105mm (probe); Body 55mm; H35mm
Weight: 300g, including battery
Sensitivity: Target Size better than 0.03grams (continuously adjustable)
Operating Temperature: -200 to +650C
Storage Temperature: -300 to +800C
Humidity: 98%
Ingress Protection: IP64 (IEC 529) (waterproofing & environmental protection)
Power Consumption: Standby Current: Nil, Active Mode Current (No detection): Less than 1mA and Alarm
Mode Current (metal detected): 6.5mA
Operating Time: 360hrs continuous at +25C (alkaline battery). 100 hrs continuous at +25C (rechargeable battery single charge)
Battery: 9V block battery MN1604, 6LR61 or equivalent alkaline disposable or rechargeable
Manufacturers Warranty: 3 Years parts and labour

Tested and approved to EEC ENS008-1 Table 1. EN50082-1 Table 1:1.1 Radiated emissions.
Conforms to international standards IEC, NILEC of FCC, FAA.