Interconnective Security Products » Metal Detector – AD10-2 http://www.interconnective.co.uk security products Mon, 23 Jan 2012 11:45:36 +0000 http://wordpress.org/?v=2.8.4 en hourly 1 Adams General Purpose Metal Detector – AD10-2 http://www.interconnective.co.uk/products/metal-detection/ad10-2/534 http://www.interconnective.co.uk/products/metal-detection/ad10-2/534#comments Thu, 05 Nov 2009 02:55:12 +0000 admin http://interconnective.co.uk/?p=534 Adams AD10-2The general purpose Adams hand held metal detectors are designed and manufactured to endure 24 hour continuous use and abuse in the toughest of working environments. After many years of reliable service, the Adams model AD 10-2 is now supplied world wide to Airports, Police Forces, Federal and State Departments, as well as Military and many other highly demanding users. The AD Series metal detectors have a sensitivity of 0.1 grams detection mass. An alarm indication is given by a piezo sounder and a high intensity LED when the battery is running low and a continuous audio/visual LED signal that the battery is exhausted.

Operating at a low energy frequency of 20 Khz all Adams hand held metal detectors use Linear Detection Technology (LDT) as the detection system. Developed in the Adams Electronics Incorporated research facility, Linear Detection Technology (LDT) produces a clean signal free from transient noise or unsafe high energy, yet enables a detection sensitivity that can detect even the tiniest fragments of metal – accurately and safely.

All the metal detectors in the general purpose range are medically tested and approved, providing no risks to pregnant women or persons with pacemakers, or any interference to magnetic recorded material. Additionally, the unit is protected again environmental conditions and waterproofing to IP64 (lEC 529). It has been tested and approved to EEC EN5008-1 Table 1. EN50082-1 Table 1:1.1 Radiated emissions. Conforms to international standards: CE mark, lEC, NILEC of FCC, FAA.

AD10-2 Specifications

Length: 362mm; Width: 55mm; Height: 30mm; Weight: 262g (including battery)
Sensitivity: Target size AD10-2 down to 0.1grms
Operating temperature: -20C to +65C. Storage temperature: -30C to +80C
Humidity: 98%
Operational Frequency: 20 KHz
Audio Frequency: 3.4 KHz
Quiescent current: 3mA
Alarm current: 6mA (Higher alarm current for detectors with “Vibration Alert” mode)
Alarm indication: Piezo audio alarm and High intensity LED

]]> http://www.interconnective.co.uk/products/metal-detection/ad10-2/534/feed 0