Deep Tissue Metal Detectors

Adams Metal Detector ER3000The Adams “Deep Tissue” Metal Detectors are arguably the smartest and best hand held metal detectors in the market today. There are two “Deep Tissue” models the ER3000 and the new edition, the AMR11. The only difference is the AMR11 has an 11 setting dial which allows the operator to select the level of sensitivity. More seasoned and trained professional users prefer the ER3000 which allows the operator to fine tune the ER3000 to a setting of their choice.

The Deep Tissue Adams hand held metal detectors have been specifically designed for the detection and location of tiny foreign metal objects that have been concealed or ingested deep within the skin tissue or body cavities. This new technology advancement in the Deep Tissue Adams hand held metal detectors have established a new level of performance for super high sensitivity metal detection, giving the user the ability to detect objects that were previously impossible to detect with a standard hand held metal detector. Deep Tissue has the ability to detect metal fragments that are concealed or buried deep within the skin tissue, making the Deep Tissue Adams hand held metal detectors a major step forward in the detection of weapons and contraband concealed within the body cavities.

Operating at a low energy frequency of 20 Khz all Adams hand held metal detectors use Linear Detection Technology (LDT) as the detection system. Developed in the Adams Electronics Incorporated research facility, Linear Detection Technology (LDT) produces a clean signal free from transient noise or unsafe high energy, yet enables a detection sensitivity that can detect even the tiniest fragments of metal – accurately and safely.

Adams Deep Tissue Metal Detectors Specifications

Product Description: Wand Style Deep Tissue Metal Detector Dimensions: Length: 360mm; Width: 105mm (probe); Body 55mm; H35mm Weight: 300g, including battery Sensitivity: Target Size better than 0.03grams (continuously adjustable) Operating Temperature: -200 to +650C Storage Temperature: -300 to +800C Humidity: 98% Ingress Protection: IP64 (IEC 529) (waterproofing & environmental protection) Power Consumption: Standby Current: Nil, Active Mode Current (No detection): Less than 1mA and Alarm Mode Current (metal detected): 6.5mA Operating Time: 360hrs continuous at +25C (alkaline battery). 100 hrs continuous at +25C (rechargeable battery single charge) Battery: 9V block battery MN1604, 6LR61 or equivalent alkaline disposable or rechargeable Manufacturers Warranty: 3 Years parts and labour Tested and approved to EEC ENS008-1 Table 1. EN50082-1 Table 1:1.1 Radiated emissions. Conforms to international standards IEC, NILEC of FCC, FAA.